This update contains the following changes and improvements: ◉ Some FT8 improvements ◉ Some WSPR improvements ◉ Implemented some additional improvements and optimizations behind the scenes Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved. Your continued support and valuable feedback play a crucial role in further improving this app. 73s, Marcus, DL8MRE

This update contains the following changes and improvements: ◉ A new Tool to maintain, import and export Memories has been added ◉ A new VoiceMacros Tool was added. Voice Macros can be send from the Macros Bar ◉ A new CW Panel was introduced allowing CW from the Waterfall screen and not only from the CW Decoder Tool ◉ The Command Bar is now also available on iPhones ◉ The FT8 tool can now handle compound messages used in Contests or by DX-Peditions ◉ Fixed some issues in the DX-Cluster Tool ◉ Multiple CAT Commands entered for the Command Bar can now be separated by a | character which will also add a small delay between commands ◉ A new Setting TX Off Delay was introduced ◉ Some accessibility improvements ◉ A new WSPR Tool was added (iOS 26 required) ◉ A new Tool Waveshare has beed added — Waveshare devices can now send remote CAT commands to tuners, amplifiers, or antenna controllers such as UltraBeam or StepIR. A relay device can also be used to remotely switch or power devices, including your radio ◉ A new Tool Metropwr has been added for Power Meter and Rotator Control (see the App manual for details) ◉ Added support for the Green Heron RT-21 Rotator controller ◉ A new APRS Mode Tool has been added which supports 300 and 1200 Baud ◉ Implemented some additional improvements and optimizations behind the scenes Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved. Your continued support and valuable feedback play a crucial role in further improving this app. 73s, Marcus, DL8MRE

This update contains the following changes and improvements: ◉ The app is now compatible with iPhone ◉ An issue with the iOS Keyboard for frequency input was fixed ◉ Added the possibility to temporary TX with a given power level by right clicking / long pressing the Tune button e.g. when using external Tuners or PAs ◉ Fixed an issue when canceling submissions of CW Macros ◉ Added the possibility to select memories via MIDI / Keyboard shortcut command ◉ Sending CW Macros will no longer focus to the CW Decoder entry field ◉ Added support for changing the unselected VFO (VFO B) frequency via MIDI ◉ Added a Lock button to prevent accidental VFO or settings changes ◉ Implemented some additional improvements and optimizations behind the scenes Note: The App Manual is currently being updated reflecting the differences between the iPad and iPhone version Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved. Your continued support and valuable feedback play a crucial role in further improving this app. 73s, Marcus, DL8MRE

This update contains the following changes and improvements: ◉ @IOS The app is now compatible with iPhone ◉ @MAC Added support for the Green Heron RT-21 Rotator controller ◉ @IOS Fixed an issue showing a wrong keyboard when entering a Frequency ◉ Added the possibility to temporary TX with a given power level by right clicking / long pressing the Tune button e.g. when using external Tuners or PAs ◉ @MAC Further improved Rotator support for the MetroPWR RT1 ◉ @MAC When looking up calls, rotators can be moved to the location of the call (Long or Short Path) ◉ @MAC On maps, rotators can be moved to spots on the map ◉ Fixed an issue when canceling submissions of CW Macros ◉ Added the possibility to select memories via MIDI / Keyboard shortcut command ◉ Sending CW Macros will no longer focus to the CW Decoder entry field ◉ Added support for changing the unselected VFO (VFO B) frequency via MIDI ◉ Added a Lock button to prevent accidental VFO or settings changes ◉ Implemented some additional improvements and optimizations behind the scenes Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved. Your continued support and valuable feedback play a crucial role in further improving this app. 73s, Marcus, DL8MRE

This update contains the following changes and improvements: ◉ The app is now compatible with iPhone ◉ Fixed an issue showing a wrong keyboard when entering a Frequency ◉ Added the possibility to temporary TX with a given power level by right clicking / long pressing the Tune button e.g. when using external Tuners or PAs ◉ Fixed an issue when canceling submissions of CW Macros ◉ Added the possibility to select memories via MIDI / Keyboard shortcut command ◉ Sending CW Macros will no longer focus to the CW Decoder entry field ◉ Added support for changing the unselected VFO (VFO B) frequency via MIDI ◉ Added a Lock button to prevent accidental VFO or settings changes ◉ Implemented some additional improvements and optimizations behind the scenes Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved. Your continued support and valuable feedback play a crucial role in further improving this app. 73s, Marcus, DL8MRE

This update contains the following changes and improvements: ◉ A few issues caused by iOS 26 were addressed ◉ For SSTV it is now possible to add a Watermark Text to the Image ◉ A new RIT / XIT panel with wheel has been introduced and some RIT / XIT issues have been fixed ◉ A new Tune Stack Panel has been introduced which records the last frequency changes per VFO. To open the Tune Stack use the View menu ◉ Fixed an issue of the CW Tool when using a different Keyboard Type ◉ Fixed an issue when setting the Speech Processor Output level ◉ Some Logbook improvements ◉ Implemented some additional improvements and optimizations behind the scenes Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved. Your continued support and valuable feedback play a crucial role in further improving this app. 73s, Marcus, DL8MRE

This update contains the following changes and improvements: ◉ This update concentrates mainly on SSTV ◉ Added support for SSTV transmission. You can now transmit and receive picture over the air ◉ Automatic slant correction is faster and more accurate ◉ Manual image adjustment tools offer finer control ◉ Added FSK ID transmit and receive support ◉ Integrated QSO logging ◉ Progress bar shows real-time TX and RX status ◉ Implemented some additional improvements and optimizations behind the scenes Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved. Your continued support and valuable feedback play a crucial role in further improving this app. 73s, Marcus, DL8MRE

This update contains the following changes and improvements: ◉ This update adds an SSTV tool for receiving and displaying images from Slow-Scan TV (SSTV) signals. The ability to transmit SSTV is planned for a future update. ◉ Implemented some additional improvements and optimizations behind the scenes Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved. Your continued support and valuable feedback play a crucial role in further improving this app. 73s, Marcus, DL8MRE

This update contains the following changes and improvements: ◉ This update adds an SSTV tool for receiving and displaying images from Slow-Scan TV (SSTV) signals. The ability to transmit SSTV is planned for a future update. ◉ Implemented some additional improvements and optimizations behind the scenes Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved. Your continued support and valuable feedback play a crucial role in further improving this app. 73s, Marcus, DL8MRE

This update contains the following changes and improvements: ◉ Improved POTA Tool accuracy from KHz to Hz ◉ Fixed an issue with POTA Spots ◉ Implemented some additional improvements and optimizations behind the scenes Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved. Your continued support and valuable feedback play a crucial role in further improving this app. 73s, Marcus, DL8MRE

This update contains the following changes and improvements: ◉ Fixed an issue with FT8 Grid submission ◉ Implemented some additional improvements and optimizations behind the scenes Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved. Your continued support and valuable feedback play a crucial role in further improving this app. 73s, Marcus, DL8MRE

This update contains the following changes and improvements: ◉ Implemented some additional improvements and optimizations behind the scenes Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved. Your continued support and valuable feedback play a crucial role in further improving this app. 73s, Marcus, DL8MRE

This update contains the following changes and improvements: ◉ A new Command Bar feature was added to start apps, send CAT commands or open Websites. Command Bar buttons can be displayed in a floating window and used along with keyboard shortcuts ◉ For the UltraBeam tool, it is now possible to manually tune to the current frequency ◉ Implemented some additional improvements and optimizations behind the scenes Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved. Your continued support and valuable feedback play a crucial role in further improving this app. 73s, Marcus, DL8MRE

This update contains the following changes and improvements: ◉ Notable improvement in FT8 decoding with the introduction of multi-pass decoding ◉ Additional FT8 decoding improvement for weaker signals surrounded by big signals ◉ New Ultra Beam Tool added ◉ New CTR2-Dial Controller support added ◉ Added the possibility to adjust the overall audio gain for Mic, Speaker and Data under Radio Settings ◉ The Power Off button now ask a confirmation before powering off ◉ Implemented some additional improvements and optimizations behind the scenes Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved. Your continued support and valuable feedback play a crucial role in further improving this app. 73s, Marcus, DL8MRE

This update contains the following changes and improvements: ◉ Fixed an issue with DST in the US ◉ Fixed an issue with Call suffixes in FT8 ◉ Fixed an issue with TX Audio (tnx Justin!) ◉ Implemented some additional improvements and optimizations behind the scenes Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved. Your continued support and valuable feedback play a crucial role in further improving this app. 73s, Marcus, DL8MRE

This update contains the following changes and improvements: ◉ The App now supports Keyboard Shortcuts e.g. for Frequency Tuning, Logging or PTT when using an external keyboard. To show all available Shortcuts long press the Command button at the keyboard ◉ Long pressing on the waterfall now allows to set the FT8 RX and TX frequency ◉ Some additional PSK Reporter improvements ◉ Implemented some additional improvements and optimizations behind the scenes Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved. Your continued support and valuable feedback play a crucial role in further improving this app. 73s, Marcus, DL8MRE