Qvantum
Utilitaires
Uniquement pour iPhone
Gratuit · Conçue pour iPhone. Non validée pour macOS.
The Qvantum app lets you control your heat pump at home. Set temperature – or set your device to “vacation mode” to save energy if you’re going away and won’t be home.
• You control heating and water directly in the overview.
• How many of you are home? Set shower level for the number of residents.
• Going away on holiday? Activate the “Away mode” – the energy saving mode – when you are away.
• Cold weather? Raise the temperature a few degrees if you are frozen.
• Guests visiting? Boost ventilation and temporarily increase the hot water so everyone can have a hot shower.
For installers – installation made easy
Scan the QR code on the packaging and get going. It’s almost as easy as 1-2-3 and the app guides you through the installation.
Easy to use!
• Check-list before installation to make sure everything is in order.
• Easy step-by-step installation and set-up.
• Installer control before handover to resident
plus New Features:
- The app has been updated to use the new branding
- Support for Homewizard P1 power meter
- Ground source settings for QG now available in service mode
Bug fixes:
- QA fan speed is now displayed correct
- Clarified wording for BT1 weather control
- Smaller bug fixes and improvements to UI
- Fixed an issue where QH-175 was displayed as QA-9
1.21 -18 h
Features
- I/O Config mode: Activate Cooling
- New I/O config input: Plugwise Flame state available for machines connected to a Plugwise device
- Support for offline installations
Installation
- QG cooling settings available in installation setup and service mode
- Improved QG Anti-Freeze Liquid settings
Fixes
General
- GP2 speed and BF1 flow was shown in many decimals in System Overview
Home user
- Fix defrost symbol briefly visible before disappearing
- Remove extra ventilation when QS is connected
1.20.26 1 avr.
Features
- I/O Config mode: Activate Cooling
- New I/O config input: Plugwise Flame state available for machines connected to a Plugwise device
- Support for offline installations
Installation
- QG cooling settings available in installation setup and service mode
- Improved QG Anti-Freeze Liquid settings
Fixes
General
- GP2 speed and BF1 flow was shown in many decimals in System Overview
Home user
- Fix defrost symbol briefly visible before disappearing
- Remove extra ventilation when QS is connected
1.20.24 30 mars
New Features
- Scheduler – Configure a weekly schedule to control heat pump operation.
- I/O Configuration – Enable control of the heat pump via digital inputs and outputs.
- Installation Templates – Added template support for new heat pump installations.
Enhancements
- Enabled energy measurement screen for Spanish installations.
- Improved handling of Away mode across different time zones.
- Updated System Overview and Service Mode interfaces.
- Updated BBR and operation mode settings in Initial Setup.
Fixes
- General UI improvements and minor bug fixes.
1.19.19 2 mars
New Features
- Scheduler – Configure a weekly schedule to control heat pump operation.
- I/O Configuration – Enable control of the heat pump via digital inputs and outputs.
- Installation Templates – Added template support for new heat pump installations.
Enhancements
- Enabled energy measurement screen for Spanish installations.
- Improved handling of Away mode across different time zones.
- Updated System Overview and Service Mode interfaces.
- Updated BBR and operation mode settings in Initial Setup.
Fixes
- General UI improvements and minor bug fixes.
1.19 24 févr.
Enhancements
- Made smart control available in Germany
- Various improvements to UI and data loading
- Screed dryout can be run in "addition only" mode
- Added a Dutch privacy policy
New features
- Adaptive cooling: making it possible to produce cooling lower than 18° (if supported by heat pump)
- Configure output relays through app
- New setting to use weather service instead of outdoor temperature sensor
Bug fixes
- Fixed issue where fan mode value did not update correctly in service mode UI
- Fixed issue where smart control did not appear as active
1.18 19/12/2025
Features
- Added support for installation of additional Qvantum devices and models
- Smart Control is now available in the Netherlands and Austria
- Silent mode settings for Germany
- Screed dryout mode
- Away Mode scheduled in the future is more apparent
Enhancements
- Main contractor - Simplified warranty registration for installations
- Improved error handling and tooltips
Fixes
- Various fixes to installer mode
- Fixed issue with "Reset alarms" button not working for all alarm types
1.17 01/12/2025
New features
- Filter change reminder
- Ownership change
- Support for QT install
Enhancements
- Dutch language now available
- Add additional devices flow enhancements
Installer
- Additional countries for heat pump installation settings
- Installation checklist items update
- Operation mode in Service mode mirrors Operation mode in user mode
- Added Plugwise and Sonoff setup to installation
Fixes
- System overview, fixed precision and added Compressor speed
- UI fixes
- Bug fixes
1.16.54 15/11/2025
New features
- Filter change reminder
- Ownership change
- Support for QT install
Enhancements
- Dutch language now available
- Add additional devices flow enhancements
Installer
- Additional countries for heat pump installation settings
- Installation checklist items update
- Operation mode in Service mode mirrors Operation mode in user mode
- Added Plugwise and Sonoff setup to installation
Fixes
- System overview, fixed precision and added Compressor speed
- UI fixes
- Bug fixes
1.16.53 14/10/2025
New features
- Filter change reminder
- Ownership change
- Support for QT install
Enhancements
- Dutch language now available
- Add additional devices flow enhancements
Installer
- Additional countries for heat pump installation settings
- Installation checklist items update
- Operation mode in Service mode mirrors Operation mode in user mode
- Added Plugwise and Sonoff setup to installation
Fixes
- System overview, fixed precision and added Compressor speed
- UI fixes
1.16.52 06/10/2025
New features
- Filter change reminder
- Ownership change
- Support for QT install
Enhancements
- Dutch language now available
- Add additional devices flow enhancements
Installer
- Additional countries for heat pump installation settings
- Installation checklist items update
- Operation mode in Service mode mirrors Operation mode in user mode
- Added Plugwise and Sonoff setup to installation
Fixes
- System overview, fixed precision and added Compressor speed
- UI fixes
1.16.48 01/10/2025
New features
- Filter change reminder
- Ownership change
- Support for QT install
Enhancements
- Dutch language now available
- Add additional devices flow enhancements
Installer
- Additional countries for heat pump installation settings
- Installation checklist items update
- Operation mode in Service mode mirrors Operation mode in user mode
- Added Plugwise and Sonoff setup to installation
Fixes
- System overview, fixed precision and added Compressor speed
- UI fixes
1.16 25/09/2025
General
Enhancements
• QR-code scanning switches to the corresponding user or installer mode
• Haptic feedback for buttons and notifications
• More accurate countdown timers
Installer
New Features
• Cooling curve in Service mode
• Circulation pump speed control in Service mode
Enhancements
• Maximum BBR power displayed in watts
• Added country field to warranty registration
• Revised texts installation-checklist tooltips
1.15 26/06/2025
General
- Improved support for older display versions ~1.0.34 and below
Installer
- Remote service - use service mode / system overview to remotely change the heat pump configuration
- QS can be added to QE heat pumps as an add-on
- WiFi can be set during installation
- Cooling curve added for QE in heat pump setup
- Completing the checklist is not required to close an installation
Various other UI and bug fixes.
1.14.27 30/05/2025
General:
- Added SmartControl
- Improved onboarding
- Added Plugwise and Sonoff integrations
Home Users:
- Added:
- System Overview
- Hot Water Configuration
Installer:
- More country options available
- Cooling function limited to QE (QH/QA removed)
- Installation steps renamed
- Bluetooth connection status added
Various other UI and bug fixes.
1.13.1 27/04/2025
General
- Implement QCloud with Operation Mode
Installer
- Alarms in Service Mode
- SG Ready enabled for Germany
- SG Ready optional outside Germany
Home User
- End User License Agreement/Data Policy added in German
- New Operation Mode setting
- Energy Screen for DE
- "Always On" in Additional Hot Water
Enhancements
- QR code deep links
- Extended Language Support
- Warn if client and installer emails match
- Away Mode UI
- WiFi Enhancements
Bug fixes
- Missing translations
- Heat curve calc
- Sync settings issue
1.12.0 24/03/2025
What's New
• Scanning QR code will open app
• Cooling support for Installer mode (service mode will be added in next release)
• Evu block support (EVU §14a)(Only Germany)
• Enhanced security for remote control of the heat pump
• Alarm feature for active alarms (Home User mode only, for now)
Enhancements
• Improved WiFi flow & translations
• Enhanced installation flow
Fixes
• UI, sync, & connection issues
• Corrected temperature readings & naming
• Updated support phone numbers (SE/UK)
1.10.0 20/02/2025
New Features
- Added users list to heat pump settings
- Language option is now available on landing screen
Enhancements
- Made improvements to installation/service procedure
- Fixed incorrect wordings
Bug Fixes
- Addressed several UI issues throughout the app
- Improved inconsistencies found in installation flow
1.9.0 12/12/2024
New Features
- Added support for communicating with heat pump via Qvantum Cloud
Enhancements
- Improved error messages in warranty registration
- App no longer require a completed installation before warranty registration menu option is available
- Updated product information pages
Bug Fixes
- Fixed issue where camera would not autofocus
- Corrected handling of outdoor sensor values caused by broken/disconnected sensor
- Use .15 as a rounding breakpoint for selecting heating curve
- Fixed deadzone issue on User home screen causing them not being able to scroll
1.8.0 05/11/2024
Home User
-Fix for bluetooth Auto-connect to heat pump didn’t work when switching from installer to user mode
-Fix for if the indoor temperature sensor wasn’t connected the app showed -30degrees as indoor temperature
Installer
-Fix for QA type setting now updates correctly when installing QH/QA and switching between QA types
-Fix for phone number field in Customer step 8/9 was marked as required but not enforced
-Fix for QH installation, the check mark for Checklist in overview was not always checked, this was blocking the ability to complete an installation
-Fix for Register warranty button was disabled when entering Warranty page
1.7.1 07/10/2024
New features
- Added "pull down to refresh" for heat pump connection
Enhancements
- Made several improvements to UI
- Made clarifcations to QH/QA registration flow
Fixes
- Made various improvements to heat pump bluetooth communication
- Improved account creation/sign-in process
- Fixed issue where some verified accounts had to go through verification process
- Fixed desync issue with app / heat pump values
1.7.0 17/09/2024
#### New Features:
- Warranty Registration: Now supports registering devices with two separate serial numbers for QH and QA. The QH serial is scanned, while the QA is manually added.
- QA Model Options: Users can now choose specific QA model configurations, including combinations like "QH+QA-9, 1 phase", "QH+QA-15, 1 phase", and "QH+QA-15, 3 phase".
#### Improvements:
- Enhanced Weather Display: The indoor card now displays the current weather symbol for easier tracking.
- Better Away Mode Activation: The away card is now more prominently focused when activating away mode.
- Redesigned Verification Page: The account verification page has a fresh new look for better usability.
- Optimized Home Screen Icons: The IoT icon is now prioritized over the WiFi icon on the home screen when both are connected.
- Safety Disclaimer: Added a safety disclaimer for standalone QH device installations, ensuring necessary safety measures are highlighted.
- Warranty Registration Flow: The warranty registration step has been moved to after the display sync, simplifying the installation process.
#### Bug Fixes:
- WiFi Connection Pop-up: Fixed an issue where the "Connect to your WiFi" pop-up appeared incorrectly during installation.
- Permission Handling: The app now correctly asks for Bluetooth/camera permissions if they were previously denied.
- Text Overlaps: Resolved overlapping text issues in the "Send email" screen during account verification.
- Installation Crash: Fixed a crash during installation step 5 by adding a null check.
- Heat Pump Setup: Removed unnecessary milliseconds delay during the heat pump setup process.
- Max Supply Temp default: Max supply temperature is set to 40 by default instead of 80
1.6.3 28/06/2024
Features
- Added option to switch between and rename registered heat pumps
- Added new service mode option to installer overview
- Made it possible to join existing heat pump installations
- Added support for scanning QH heat pumps
- Updated navigation behaviour in installation section
- Improved UI for small screens
- Added option to adjust indoor sensor settings
- Added support for Microsoft login
- Updated product sheet link for QE model
- Give installer permissions when navigating to installer mode
Bug Fixes
- Fixed issue where wifi network list was not loading (available with heat pumps running versions > 1.0.32)
- Fixed issue where product name did not match article number
- Fixed issue with temperature slider not updating on display value change
- Removed sendcommand delay after letting go of temperature slider
- Added condition to disconnect device when going to new installation screen
- Deleting installation removes installer from installation document instead of deleting it
- Hid faulty text about sending installation protocol to customer
- Fixed case where auto connect did not trigger when moving from installer mode to user mode
- Applied safearea to app content
- No longer auto capitilizes input on login screen
- Corrected logic of hot water capacity card
- Timeout wifi network drawer loading after 5s
- Solved overflowing german text on side drawer
- Corrected some Swedish translations
1.5.9 29/05/2024
Features
User:
- Made improvements to home screen cards
Installer:
- Only show review & close when installation is complete
- Added installer info page
- Added required asterisks to installer info fields
- Handle incomplete client info when registering
- Lead installer to next uncompleted step
Bug Fixes
- Changing the camera permission doesn't immediately open the camera after issue fixed
- Updated translations
1.4.6 07/03/2024
- Added option to register warranty information through installation
- Various UI improvements
1.4.0 12/02/2024
New Features:
- The app has been updated to use the new branding
- Support for Homewizard P1 power meter
- Ground source settings for QG now available in service mode
Bug fixes:
- QA fan speed is now displayed correct
- Clarified wording for BT1 weather control
- Smaller bug fixes and improvements to UI
- Fixed an issue where QH-175 was displayed as QA-9
plus Version 1.21 -18 h
Données établissant un lien avec vous Les données suivantes peuvent être collectées et liées à votre identité :
Données n’établissant aucun lien avec vous Les données suivantes peuvent être collectées, mais elles ne sont pas liées à votre identité :
