- App-wide update for iOS 26 with the new Liquid Glass interface, with broad improvements across the map, floating panels, plan views, search, settings, and popovers. - Added a configurable panel view on the main map for waypoints, search, and plans, with left or right placement in landscape. - When the panel takes up less than 60% of the screen, map content now stays centred in the remaining visible area, and cursor mode snaps to that space. - The panel view is resizable and can be flicked away to dismiss. - Range ring controls and the map legend now appear in the panel view. - Some maps, including Hybrid VFR, now appear darker in dark mode - Password fields now have a visibility toggle, with Touch ID or Face ID available before revealing the password. - Added per-sector taxi fuel override for helicopter operations. - Expanded NMEA output support for more avionics. - Added a two-finger tap on the map UTC HUD widget to toggle seconds display. - Improved the TAF readout with clearer plain-text formatting, including clearer temperature and QNH details. - Added an error banner to the new plan sheet when the selected aircraft profile is invalid. - SmartBrief NOTAMs with large radii now render with smoother curves. - Improved reliability and performance across several list views. - Additional general fixes and polish across the app. - Fixed incorrect ETAs across the app when plans included mid-plan alternates. - Alternate fuel is now included on the printed fuel sheet. - Added support for Vertical Visibility and Cloud Detection Error for NZ METAR - Fixed the fuel sheet not scrolling vertically in some cases. - Fixed text sizing issues in the new plan sheet and fuel sheet when using larger accessibility settings. - Fixed fuel sheet sizing on small devices in landscape. - Fixed descent calculations to respect the selected descent rate method in the aircraft profile. - Fixed climb and descent calculations when wind information is unavailable. - Fixed runway directions when true runway heading data is missing. - Fixed the new plan sheet not refreshing after removing a waypoint beside the map view. - Fixed alternate legs incorrectly showing climb segments when they were not required. - Fixed the closest waypoints list not updating after deleting a user waypoint. - Fixed the Scratchpad eraser so it no longer overwrites the template. - Fixed a potential terrain rendering crash and improved terrain performance. - Fixed a crash that could occur when a margin burn rate was set to 0. - Fixed a crash caused by airspace altitude values using an ft suffix. - Fixed a crash that could occur in the frequency view when a frequency was missing.

- Fixed a crash that could occur when pressing the trip action button

- Fixed an issue where tapping on an airport could display plates for a similarly named airport - Fixed an issue where the bookmark button on airfields may not open the correct plate - Sector landings now persist when importing plans in the new plan sheet

- Show NAIPS login settings for APAC region - Fix issue where W&B value would clear on new plan sheet - Improve default chart selection when double-tapping on the map - Fix issue where eraser in Scratchpad eraser would erase the template

- Fix to CRSR BRA, now using own ship local magnetic variation - Fix to sorting for closest waypoint that could cause flight logs to pick the wrong airport - Fix to trip times widget, now has correct colours in dark mode - Fix to PNR, now updates correctly on fuel volume changes - Fix for single waypoint plans where missing splay was preventing weather/NOTAM information from showing - Fix geo reference issue when rotating airfield plates - Fix where daylight saving timezone name was being shown even when it doesn't apply - Fix case where weather button could disappear on airfield plate - Fix where airfields group could end up empty - IFR Final Reserve falls back to VFR when not set - Fix Quick Plan where departure suggestions were not showing - Fix to aircraft selection on new plan sheet - Temporarily remove Dual XGPS Support - Fix crash that could occur when showing landing fees information - Other general fixes == 14.0.1 == - Resolved issues with phantom scratch pad lines and incorrect eraser colour - Added wind descriptions for NAIPS in New Plan Sheet - Fixed map zoom on launch if a plan is active - Fixed a crash that could occur in some lists under certain conditions

• Added option to display internet ADS-B/FLARM traffic on the map • Subscriptions now expire based on local time zone rather than UTC • Improved performance of the Airfields tab • Minimum OS requirement is now iOS 17 • Terrain tiles are now automatically included in downloads • Performance improvements to the scratch pad • Fixed a crash when downloading invalid KMZ files from Dashboard • Fixed an issue where the fill-down button was not being applied on the new plan sheet • Fixed a crash that could occur with certain GDL90 messages • Dashboard profiles are now cleared when switching users • Improved error reporting for database download failures

New Plan Sheet changes • Fixed a UI sizing issue with custom aircraft icons • Fixed track values in Quick Plan displaying incorrect rounding when using new plan sheet • Inferred revised estimate values are now included in printed plan sheet • Fixed a crash that could occur in new plan sheet with zero-length legs • Fuel on Board (FOB) and Endurance are now two seperate items on the fuel plan sheet • Use endurance value from fuel plan sheet for NAIPS flight notification form • Show ‘0’ alternate fuel instead of blank on fuel plan sheet (for sectors without alternates) • Cell UI indicators (grey/blue triangles) now update for all cells when values are user-edited General Fixes & Updates • Hide the SmartPlates sidebar for accounts that do not have SmartPlates access, or if turned off • Fixed a bug where headings above 360 (370... 380...) were being shown in the GPS HUD compass • The ‘Cancel’ button is now displayed in the lower right HUD box on reduced sized windows (e.g. iPad split screen or new OS 26 windowed mode) • Fixed blurry tiles and black background issues with high zoom level custom dashboard maps and other map insets • Fixed duplicate entries of enterprise dashboard custom maps int he Choose Map list • Fixed a crash that could occur when searching in PDF files in OS 26

• Fixed an issue where ‘IFR’ rules were not correctly being set on new plans • Fixed an issue where aircraft with Fuel Tables were setting start fuel / Fuel on Board to a specific value instead of using the flow on value from previous sectors • 'FUEL' column summary total for a sector is now shown on the printed plan sheet • Fixed an issue with new plan sheet showing incorrect GS for IFR waypoints • Fixed an issue that allowed editing of locked weight and balance stations, envelopes and fuel tables

• Custom colours can be applied to any column in the plan sheet. Find the option in Plan Sheet Settings • New look fuel plan sheet (feedback welcomed) • 'Alternate' summaries in the fuel plan now only show the subtotal information relevant to the alternate leg/route • Default refuel is only applied on the first sector in a plan. Subsequent sectors will now use the remaining fuel from last sector by default • Additional and approach fuels are now deducted from the fuel required amount when determining subsequent sector start fuel values • 'Holding' duration on the fuel plan now calculates using holding burn rate, if specified in the aircraft profile • Airwork / holding, & hover burns now always calculate using their respective aircraft profile value, if present • Fixed some absent NAIPS form export information e.g. TEET • Printing the new plan sheet now includes starting Fuel on Board (FOB) as a seperate line item • Fixed an issue where aerodrome plates could not be rotated when using 'Dark' theme • Fixed an app freeze that could happen on Settings page • Display Aircraft ID in aircraft profile selection list, if different from registration • Removed 'SUNSET' HUD box • Removed indefinite loading spinner in Airfields 'List' view that prevented all other app interaction • Improved launch process after app deletion, now shows onboarding sequence • Removed 'swipe to go back' gesture on Documents thumbnail view in iOS 26 • Fixed a crash that could occur when pausing downloads • Fixed a crash on server error in NAIPS Amend/Cancel • Fixed a crash on server error in Waypoint Details Wx/NOTAMs view • Fixed a crash on the Fuel Plan Sheet that could occur in iOS 16 & 17 when loading with no data • Fixed an iOS 16 date picker crash

- Fixed an issue where some files could incorrectly display a download error, or trigger unnecessary re-downloads

- Fixed the alternate fuel result including the entire sector up to and including the alternate segments. - Enabled quick actions on sector and alternate headings in plan sheet to cancel alternates and modify sectors.

New Plan Sheet changes - Aircraft ‘Default Additional Fuel’ amount is now applied to new sectors or when an aircraft change is made for a plan - Direct To waypoints now just say ‘Direct’ instead of showing an irrelevant direct to waypoint number - Taxi fuel is now correctly deducted from carry over fuel for multiple sector plans - Setting fuel for subsequent sectors, and also clearing it, now uses Default Refuel, Fuel Capacity, or planned amount where appropriate - Contingency and holding fuel are now correctly consumed in the plan where the associated toggle is ON in the aircraft profile - New plan sheet now correctly sets distance, track and TAS on Direct To plans - ETA, REV and ATA values will now be included when exporting a plan via PDF Pack - Fixed an issue where airwork was interfering with HDG calculations General Fixes & Updates - Fixed a crash when showing airfield pages linked to custom/user waypoints - Fixed an issue that was causing some re-downloading of files

- Added a button to view converted W&B information in the weight and balance view - Removed discontinued BOM radar view. - Fix crash that could occur when loading landing fees - Enabled decimal and minus key for W&B keyboard entry - Added a space bar key for coordinate entry when entering data for a custom user waypoint - Fixed single finger double tap to zoom functionality - W&B Unit separator changed from a dash '-' to an interpunct '·' for multiplied units - Revised moment arm conversion numbers for W&B to ensure correct values are being used - Updated decimal precision for W&B moment arm conversion factors - Ownship range ring (x NM/km Circle) will now set to lower clamped value if a smaller value is entered by the user - Range ring entry for waypoints now has a minimum slider option of 1NM to bring it in line with the text entry field == New Plan Sheet == - Fixed some calculation issues that could arise when an aircraft has ONLY detailed performance information in lieu of basic/single figure performance information - Changes to 'Pilot', 'Flight Rules' and 'Flight Type' are now sticky across Plan Sheet and Plan Details popup - Taxi fuel is now deducted from the first segment of each sector in the plan sheet 'FOB' column. - When creating a new sector, taxi fuel is correctly deducted for the first segment without having to exit and enter the plan sheet - Fixed issue where arrival height was using 0 instead of airfield height when determining TOD point - TOC is no longer displayed when route is 'direct to' whilst flying - Calculation improvements for how wind is applied to climbs and descents

- Fix Show/Hide button (left toolbar) pushing off the screen when GPS HUD is hidden - Fixed an issue where imported User Waypoints could be incorrectly matched to non-user waypoints - macOS: improved contrast of toolbars and floating windows - Added placeholder altitude optimiser button to 'ALT' column heading in new plan sheet - Fixed a date picker crash for iOS/iPadOS 16 - Icon Adjustments for iOS/iPadOS 26 - Plan Sheet W&B now uses a new number keyboard - Form views have had performance and layout updates

- Added bearing info when "rubber-banding" a new waypoint into an existing plan/track - Fixed Track History and Track Pointer settings not working in Map View Options - Tapping anywhere on the Flight/Engine Timer (not just the icon) will now invoke the timer menu - Importing User Waypoints no longer fills "Lat/Lon" into name field where name is blank - Fixed an issue where copy/pasting routes into Quick Plan could cause waypoint processing errors - Fixed an issue where long-press airspace details on main map screen wouldn’t always show complete information - Added the ability to upload Aircraft Profiles direct to Dashboard - Added support for electric Aircraft Profiles (kW, kWh units) - Added support for toggling map collars on/off (where present) - Various New Plan Sheet improvements: new custom keyboards, Performance, UI, Windy Route, Stability, Refreshing, Fuel, Printing, Plan Features - Fixed crash that could occur in iOS 16 with the date picker - Fixed HUD to respect aircraft profile units (GS, DTG) - ScratchPad tab is hidden when window is scaled down to improve iPadOS 26 compatibility - Fix visual touch indicators distorting after rotating on iPadOS 26 - Fix cases where scrolling wouldn’t work in the long-press airspace selector - Fix a refresh issue on Plan Summary when changing times - Fix a freeze that could happen when viewing a document on the Airfields page - Fix a potential UI freeze after resuming the app (c1d0a311, 92c0bfd9) - Various fixes for iOS/iPadOS 26 - General performance improvements

- Change date selectors in plan sheet from calendar to wheels - Fixed an issue where opening a file could open a new window on iPad - Fixed an issue where importing GPX files would crash - Update displayed units km, kt, ft/min, m/min app wide to be closer to ICAO standards - SmartBrief now shows GAF PDF in full screen - General stability improvements - New plan sheet fixes

- Added kilometre (km) option to Own Ship Circle - Various updates and changes to the new plan sheet (currently EXPERIMENTAL, access by request only, contact support) - Added Sentry mount position options for AHRS - Added Client Mode support for Sentry Plus - Fixed an issue where the AHRS button may not initially appear when connecting a supported device - Fixed an issue where User Waypoint names wouldn't update on the map when renaming via plan - Improved KML overlay handling to reduce line thickness at high zoom levels e.g. power lines - Improved colours/readability for airspace details box (i.e. no more black text on blue background) and added support for light dark/mode - Weight and Balance MTOW circle now correctly highlights red when greater than MTOW limit (if set) - Bearing line is now shown for single waypoint plans - Minimum contingency fuel time, if set in aircraft profile, now calculates correctly on the fuel plan sheet - Added support for uploading plans to Enterprise Dashboard. Option must be added to the enterprise account, contact support for access. - Fixed a stability issue that could occur when the app gets suspended/backgrounded - Fixed splay size of 'non GNSS Area Navigation', now correctly extends to 40NM instead of 44NM - Fixed TAFG visibility darkening for overlapping FM/TEMPO periods - Overhaul/update for Swift 6, includes performance optimisations to Maps, Airspace, Terrain, LSALT Assistant and SmartBrief - Various performance improvements

- Add status icons to subscriptions in Settings > Subscriptions - Subscription expiry warning no longer appears for an expiring trial where a subscription has already been purchased - Fixed an issue where air routes could be erroneously inserted into a plan - Fixed an issue where fuel weights in a Fuel Table would convert when aircraft 'Weight' unit changed (now only converts when 'Fuel' unit is changed) - Fixed an issue where traffic bubbles would not fade out on connection loss - Fixed an issue where certain waypoints could appear in the 'Closest Points' tap on map popup even if they were turned off - Fixed a stability issue that could occur when viewing details in SmartBrief - Altitude Optimiser now shows OAT for NAIPS Wind/Temp, instead of ISA deviation - Fixed a SmartBrief caching issue - General performance improvements

- uAvionics and Sentry ADS-B devices show serial in decimal instead of hexadecimal - Fix blurry Hybrid VFR map on first install - SmartPlates overlay follows rotation of DAPS - Fix excessive network requests for weather overlay - Fix text annotations duplicated on AIP-SUP plates

- Red active restricted areas on the main map screen now more closely match SmartBrief where we have manually edited the RA dimensions (e.g. partial activations of Woomera WRX) - Tap-on-map targets tweaked making it less likely to tap the magenta route line, and more likely to tap a waypoint icon - Height above ground (HAG) HUD box now shows '--' instead of '-1' for missing data - Airdropping flight plans with custom waypoints that have an empty name field are now kept empty rather than changed to 'Not set' - The SmartBrief 'Your ETD is in the past' alert no longer appears when you are actively flying. This should only occur on the ground now. Please let us know if you see this airborne. - Fixed an issue where SmartBrief detail view was incorrectly displaying a "no data" message - Fixed a crash that could occur when viewing a SmartBrief GAF with duplicate condition entries - Fixed an issue where Map Track up direction toolbar icon could shrink

• Traffic from GDL90 broadcasting as on ground will show ‘GND’ in the traffic bubble • Fixed some visual glitches that would show on the SmartBrief detail view when adjusting controls • Fixed a text layout issue that could occur in Quick Plan when using an external keyboard • GDL90 device ‘Sentry Mk2’ added to the supported devices list • Device settings are now shown on the Settings screen even for unknown hardware IDs • Fixed a bug where it wasn’t possible to tap a route segment with map in Track Up mode • Route feature labels (e.g. Top of Descent) will now remain upright in map Track Up mode • Altitude Optimiser now processes an alternate leg (if present) • All NOTAM filters on SmartBrief are enabled by default on a fresh install • Fixed an issue where the close button on IFIS form may not show • General performance and stability improvements

- Hide ADS-B traffic bubbles that match ICAO address (if entered) in the active aircraft profile - Open Street Map / map engine performance improvements - 'Submit to IFIS' button in Plan Sheet now correctly opens the IFIS form - IFIS: where Z and G are selected for 'Equipment and Capabilities' in the active aircraft profile, 'RNP2' is added to the 'NAV/' field - IFIS: (IFR) Remove 'DCT' from route, last 'DCT' line that would otherwise be empty is now removed - Fix IFIS form UI spacing layout on route table - Update Avidyne SDK to v10.3.2.2 - Fixed a portrait view spacing issue in SmartBrief - Stability improvements to airspace shapes rendering and detection - General stability improvements

- Fix to plan sequencer times when in planning mode - Fix calculation issue when toggling alternate on plan sheet - Fix minor altitude rounding issue for terrain objects - Traffic bubble rendering optimisation - Stability improvements to Flight Phase Manager - In app simulator, recenter button turns on cursor, retains current altitude, speed and heading - In app simulator view will move above the on screen keyboard when entering values - New plan sheet improvements

- When creating a new user waypoint, show user waypoints on the map. - Improve the formatting of “nm” units to “NM” for better readability for GPS hud. - Enhance the performance and accuracy of QuickPlan. - Resolve issue where adding air routes from waypoint details can result in the wrong sequence and add landing points. - Resolve the issue where refuelling a sector does not utilise the default amount - Improvements to new plan sheet

- Fixed an error that would occur on importing organisation plans - Fixed a crash that could occur in Airfields tab - Prevent crash on empty results on AIP searches - New plan sheet improvements